Filter
Top Products
96 Chapter2
Opening Your Personal Workstation and Installing Accessories
Hard Disk Drives
WARNING Turn the Personal Workstation off and unplug the power cord
before installing or removing the hard disk drive.
Installing a Hard Disk Drive in the Standard Hard Disk Drive
Bay Area
1. Remove the left-side panel as explained in the section “Removing the
Left-Side Panel” in this chapter.
2. Attach the guide rails to both sides of the hard disk drive. See Figure
2-52 and Figure 2-53. Note that the narrow blue plastic guide rails
located on the chassis of the CD drive bay area are used on the hard
disk drives.
Figure 2-52 Hard Disk Drive and Guide Rails
Figure 2-53 Attaching the Guide Rails to the Hard Disk Drive
Guide Rail
Guide Rail
Hard Disk Drive Top
Hard Disk Drive Back
Ejector Tab
Ejector Tab
Right
Left
Hard Disk Drive Top
Hard Disk Drive Back
Guide Pin
Guide Rail