Filter
Top Products
Chapter 2 115
Opening Your Personal Workstation and Installing Accessories
Installing and Removing Accessory Boards
Removing I/O Cards
The procedure in this section explains how to remove I/O cards from the
I/O card slots on the system board.
WARNING Turn the Personal Workstation off and unplug the power cord
before installing or removing I/O cards.
To remove your I/O card, follow this procedure:
1. Remove the left-side panel as explained in the section “Removing the
Left-Side Panel” in this chapter.
2. Unscrew the T-15 Torx screw from the I/O card’s bulkhead as shown
in Figure 2-78.
Figure 2-78 Removing the I/O Card’s T-15 Torx Screw
Bulkhead
T-15 Torx
Screw
I/O Card