Filter
Top Products
154 Chapter3
Troubleshooting Your Personal Workstation
Using HP MaxiLife to Diagnose Problems
Pre-Boot Checks
When you press your Personal Workstation’s on/off button, HP MaxiLife
will check your system before it initiates the start-up sequence. You will
see one of the following messages on the LCD as these checks progress:
Table 3-2 Pre-Boot Messages
Message Description of what to do
Error! Power supply Check power supply and power cable
connections.
Error! Proc slot1 issue Check for processor in slot 1.
Error! Socket Proc 1 Check that a CPU or terminator is installed
in CPU slot 1.
Error! Socket Proc 2 Check that a CPU or terminator is installed
in CPU slot 2.
Error! Power supply Check with your local HP Service
Representative.
Error! Vcache L2 error Check processor 1 and 2 VRM installations.
Error! VCC CPU 2 error Check processor 2 VRM installation.
Error! Memory error Check memory installation.
Error! No DIMM Check memory installation.
Error! DIMM devices Check that DIMMs installed are compatible.
Error! No HW monitoring Check with your local HP Service
Representative.
Error! No Video Check for system video card.
Error! Power Check that the processor is installed
correctly.
Check that there is no VRM plugged in
adjacent to a processor slot terminator.