Filter
Top Products
Chapter 2 65
Opening Your Personal Workstation and Installing Accessories
Removing and Replacing the Left-Side and Front Panels
2. Place the hinge tabs of the bottom section into the hinge slots. To
complete this step, hold the bottom section of the front panel at a 15
degree angle to the front of the Personal Workstation and pull in the
direction of the arrow. See Figure 2-11.
Figure 2-11 Connecting the Bottom Section to the Personal Workstation
3. Close the bottom section by pushing it inward in the direction of the
arrow. See Figure 2-12. The retainer tabs should snap into place.
Figure 2-12 Closing the Bottom Section
View from
the top
15˚
Pull
View from
the top
15˚
Retainer Tabs
for the Front
Panel Bottom
Section
Push