Filter
Top Products
Menu item Sub-menu item Sub-menu item Values Description
General Print
Behavior
Default Paper Size Select from the list of
paper sizes.
Use this feature to configure the default paper
size used for print jobs.
Override A4/Letter No
Yes (default)
Use this feature to print on letter-size paper
when an A4 job is sent but no A4-size paper
is loaded in the device (or to print on A4 paper
when a letter-size job is sent but no letter-size
paper is loaded). This option will also override
A3 with ledger-size paper and ledger with A3-
size paper.
Manual Feed Enabled
Disabled (default)
When this feature is enabled, the user can
select manual feed from the control panel as
the paper source for a job.
Courier Font Regular (default)
Dark
Use this feature to select which version of the
Courier font you want to use.
Wide A4 Enabled
Disabled (default)
Use this feature to change the printable area
of A4-size paper. If you enable this option,
eighty 10-pitch characters can be printed on
a single line of A4 paper.
Print PS Errors Enabled
Disabled (default)
Use this feature to select whether a
PostScript (PS) error page is printed when
the device encounters a PS error.
Print PDF Errors Enabled
Disabled (default)
Use this feature to select whether a PDF error
page is printed when the device encounters
a PDF error.
Personality Auto (default)
PCL
PDF
PS
Select the printer language that the device
should use.
Normally you should not change the
language. If you change the setting to a
specific language, the device does not
automatically switch from one language to
another unless specific software commands
are sent to the device.
Table 2-14 Device Behavior menu (continued)
46 Chapter 2 Control Panel ENWW