Filter
Top Products
Legato NetWorker, Release 7.0
Disaster Recovery Guide
5
Recovering a Replicated NDS Partition
102
Recovering a Replicated NDS Partition
If the NetWare server did not contain an NDS partition (replicated or not), do
not complete this section. Instead, complete only “Recovering the NetWare
Operating System” on page 91 and “Recovering a NetWare NetWorker Server”
on page 94.
This section contains the following information on recovering a replicated
NDS partition over the network:
• “How to Recover a NetWare 4.10 SYS Volume” on page 102
• “How to Recover a NetWare 4.11, NetWare 5.0, or IntraNetWare Server
SYS Volume” on page 105
Important: For NetWare 4.11/IntraNetWare servers, do not delete the server
or volume objects for the failed volume from the NDS tree; you do not want to
eliminate any references other objects might have to the volume. If you must
delete objects on a NetWare 4.11/IntraNetWare server, use the NetWare 4.10
procedure for recovering from a disaster.
How to Recover a NetWare 4.10 SYS Volume
To recover a SYS volume on a NetWare 4.10 server, complete the following
tasks:
• “Task 1: Recover the NetWare 4.10 SYS Volume” on page 102
• “Task 2: Restore the SMS Remote File System” on page 104
• “Task 3: Complete the Recovery of the NetWare 4.10 SYS Volume” on
page 105
Task 1: Recover the NetWare 4.10 SYS Volume
To recover a SYS volume on a NetWare 4.10 server:
1. Use the NetWorker Administrator program or netadmin to delete the
volume objects associated with the failed server.
2. Use NDS Manager or partmgr to delete the server object for the failed
server. You cannot use netadmin to delete a server object.
Partition Manager displays a warning message; enter Yes to confirm the
deletion.