Filter
Top Products
Legato NetWorker, Release 7.0
Disaster Recovery Guide
Chapter 9: HP TruCluster Disaster Recovery
9
151
recover> delete etc/dfsl*
recover> delete dvrdevtab
recover> cd /cluster/members/member1
recover> delete boot_partition dev devices
recover> delete etc/ddr*
recover> delete etc/gen*
recover> delete etc/dfsl*
recover> delete dvrdevtab
where cluster_default_alias is the name of the cluster.
3. Repeat the following delete command for each cluster member, except for
cluster members 0 and 1.
recover> delete /cluster/members/membermember#
recover> force
recover> relocate /mnt
recover> recover
where member# is the member ID of any cluster member except node 0 or 1.
4. Use the recover command in interactive mode to restore the dev and devices
directories for each cluster node as shown in the following example.
Note: The noforce option is used in this step so that recovered files do not
overwrite existing files.
# recover -c cluster_default_alias
recover> add /dev /devices
recover> cd /cluster/members/member0
recover> add dev devices
recover> cd /cluster/members/member1
recover> add dev devices
recover> noforce
recover> relocate /mnt
recover> recover
where cluster_default_alias is the name of the cluster.