Filter
Top Products
Legato NetWorker, Release 7.0
Disaster Recovery Guide
Chapter 5: NetWare Disaster Recovery
5
107
4. Use dsrepair to perform an unattended full repair to ensure the ring is
functioning properly.
Refer to DSMISC.LOG to determine which replicas were stored on the
failed server. If DSMISC.LOG shows that no other server has exactly the
same replicas as the failed server, run dsrepair on any servers containing
replicas of partitions on the failed server.
5. Shut down the failed server and replace any damaged hardware. If you
need to replace a hard drive, install a drive that is the same size or larger.
Task 2: Install the Operating Systems
To install the operating systems:
1. Format the DOS partitions and reinstall DOS.
Important: Use the DOS Time command to ensure that the computer is set to
the correct time to avoid time synchronization errors.
2. Reinstall NetWare 4.11, NetWare 5.0, or IntraNetWare and NDS on the
repaired or replaced server. Run install or nwconfig, select Custom
Install, and follow the directions on the screen.
a. When prompted, enter the same server name and internal IPX
number that the server had prior to the failure. Use the
STARTUP.NCF and AUTOEXEC.NCF files included with the
server-specific information for needed information.
b. After the preliminary files are copied, the Choose a Directory Tree
dialog box appears. Press [F5] to restore NDS (option listed at the
bottom right of the screen).
c. A new window displays two options: A: (the default) or Press [F3] to
specify a different path. If the Server Specific Info files are contained on
diskette, insert the diskette into drive A and press [Enter]. Otherwise,
press [F3] and enter the path to the Server Specific Info files restored in
step 1.
d. A Remote Server Authentication login dialog box is displayed. Log
in. When prompted, enter the Directory tree name.