Filter
Top Products
Legato NetWorker, Release 7.0
Disaster Recovery Guide
11
Performing a Cluster-Wide Recovery
162
Task 4: Restore the Data
The procedures to restore the data on the primary and each of the remaining
nodes in the cluster differ. For more information, see the following sections:
• “On the Primary Node” on page 162
• “On Each of Remaining Node in the Cluster” on page 162
On the Primary Node
To restore data on the primary node:
1. Use the mmrecov command to restore the indexes, media database, and
resource files.
2. Use the recover command to recover the following initialization
directories:
AIX
• /etc/rc*
HP-UX
• /etc/rc*
Linux
• /etc/init.d
• /etc/rc*.d
For detailed instructions on using the recover and mmrecov commands,
refer to the man pages or the Legato Command Reference Guide.
On Each of Remaining Node in the Cluster
To restore data on each of the remaining node in the cluster:
1. Install NetWorker software and run the NetWorker client.
2. Recover the data and software from recent backups or from the product
installation CD-ROMs.
3. Using the virtual NetWorker server, recover the following files:
• $FT_DIR/config/*
• $FT_DIR/log/*
• $FT_DIR/<domain_name>_<node_name>