Legato NetWorker, Release 7.0
Disaster Recovery Guide
11
Recovering a Single Cluster Node
158
4. Make sure to restore the following directories:
AIX
• /etc/rc*
• $FT_DIR/config/*
• $FT_DIR/log/*
• $FT_DIR/<domain_name><node_name>
HP-UX
• /etc/rc*
• $FT_DIR/config/*
• $FT_DIR/log/*
• $FT_DIR/<domain_name><node_name>
Linux
• /etc/rc*.d
• /etc/init.d
• $FT_DIR/config/*
• $FT_DIR/log/*
• $FT_DIR/<domain_name><node_name>
5. Restore or copy the following files from the active node:
AIX
• $FT_DIR/bin/envsh ($FT_DIR/bin/envcsh if using C shell)
• /usr/bin/nw_ux.lc
HP-UX
• $FT_DIR/bin/envsh ($FT_DIR/bin/envcsh if using C shell)
• /opt/networker/bin/nw_ux.lc
Linux
• $FT_DIR/bin/envsh ($FT_DIR/bin/envcsh if using C shell)
• /usr/sbin/nw_ux.lc
6. Start the cluster virtual server on the node, as follows:
cd $FT_DIR/bin (or source ./envcsh if using C shell)
. ./envsh
./ft_startup -domain domain_name