Filter
Top Products
Legato NetWorker, Release 7.0
Disaster Recovery Guide
Chapter 6: Microsoft Cluster Disaster Recovery (Windows NT 4.0)
6
119
3. Copy the existing quorum data from its original location to another
directory. For example, copy:
G:\MSCS
to
G:\TEMP\MSCS
4. Replace the existing quorum data with the recovered quorum data. For
example, copy:
G:\RECOVER\MSCS
to
G:\MSCS
5. Shut down Node_B.
Task 3: Evict Node_B from the Cluster
To evict Node_B from the cluster:
1. Reboot Node_A.
2. Open the Cluster Administrator and evict Node_B from the cluster.
Task 4: Install the Cluster Software and Patches on Node_B
To install the cluster software and patches on Node_B:
1. Reboot Node_B.
2. Install the cluster software and join it to the cluster in which Node_A is a
member node.
3. On Node_B, apply any needed cluster patches and Windows service
packs.
4. Verify that the cluster configuration has been successfully recovered.
Performing a Cluster-Wide Recovery
Use the following procedures to perform a complete cluster recovery,
including reinstallation of the operating system on all nodes. These procedures
describe how to perform a recovery, either using existing hardware or new
hardware.