Filter
Top Products
Legato NetWorker, Release 7.0
Disaster Recovery Guide
Chapter 4: Windows Disaster Recovery
4
59
• Change to <NetWorker_install_path>\bin before executing the recover.exe
command.
• At the command prompt, include the full path and filename to
<NetWorker_install_path>\bin\recover.exe.
•Ensure that <NetWorker_install_path>\bin occurs before
%SystemRoot%\System32 in your PATH environment variable.
To create an ERD using the NetWorker recover command:
1. On the NetWorker server, insert a blank, formatted disk into the A: drive.
2. Change to the directory that contains the NetWorker binary files. The
default location is <NetWorker_install_path>\bin.
3. Recover the REPAIRDISK save set using the recover command as follows:
recover -c failed_hostname
recover> cd /
recover> add REPAIRDISK
recover> relocate a:\
recover> recover
This procedure initiates recovery of the failed computer’s REPAIRDISK
save set to the disk in the NetWorker server’s A: drive.
How to Use the ERD to Repair the Windows NT 4.0 Installation
To use the ERD to repair the Windows NT 4.0 installation:
1. On the computer you are recovering, insert Windows NT 4.0 Setup Disk 1
into drive A: and reboot the computer.
2. When prompted, insert Windows NT 4.0 Setup Disk 2 into drive A: and
press [Enter].
3. When the Setup Welcome screen appears, press [R] to select the Repair
option.
4. Select the appropriate emergency repair options, then select Continue and
press [Enter].
5. When prompted, insert Windows NT 4.0 Setup Disk 3 into the A: drive
and press [Enter].
6. Insert the ERD into the A: drive and press [Enter].