Filter
Top Products
Legato NetWorker, Release 7.0
Disaster Recovery Guide
Chapter 4: Windows Disaster Recovery
4
73
nsrmm -d volume_name
For example, if the NetWorker software requests the original volume
mars.1 but that volume is not available, run the following command to
delete mars.1 from the media database:
nsrmm -d mars.1
c. Restart the following NetWorker services:
– NetWorker Backup and Recover Server
– NetWorker Remote Exec Service
d. Run the mmrecov command to recover the bootstrap.
4. If the server has multiple devices configured and enabled, the following
message appears:
What is the name of the device you plan on using
[\\.\Tape1]?
If you receive this message, enter the name of the device you are using for
the recovery. For example, enter \\.\Tape0
5. When the following message appears, enter the save set ID for the latest
bootstrap. If you are recovering the bootstrap from a clone volume, enter
the save set ID associated with the clone.
Enter the latest bootstrap save set ID: 20076
6. When the following message appears, enter the file number to begin the
recovery (if known) or accept the default of zero.
Enter starting file number (if known) [0]: 130
7. When the following message appears, enter the first record number to
begin the recovery (if known) or accept the default of zero.
Enter starting record number (if known) [0]: 0
8. When the following message appears, ensure that the volume that
contains the correct save set is inserted into the correct backup device, then
press [Enter]:
Please insert the volume on which save set ID 20076 started
into \\.\Tape0. When you have done this, press <RETURN>:
9. Once the appropriate volume is loaded, the following message appears:
Scanning \\.\Tape0 for save set 20076; this may take a
while...