Filter
Top Products
Legato NetWorker, Release 7.0
Disaster Recovery Guide
5
Recovering a Replicated NDS Partition
104
– Log in and specify the context for the server and its objects. Use the
same context used before the disaster.
– Edit the STARTUP.NCF and AUTOEXEC.NCF files to match the
versions recovered with SSI.
When the installation is complete, the server will contain all the files
necessary to perform an SMS remote filesystem restore. For more
information, see “Task 2: Restore the SMS Remote File System” on page
104.
Task 2: Restore the SMS Remote File System
To restore the SMS remote filesystem to a SYS volume on a NetWare 4.10
server:
1. Load the required name space modules for each restored volume. Use the
VOLSINFO.TXT file to determine which name spaces need to be loaded
(MAC.NAM, LONG.NAM, etc.).
2. Load the filesystem TSA specific to your version of the NetWare operating
system, by entering one of the following commands:
LOAD TSA410
LOAD TSA312
LOAD TSA500
3. Recover the filesystem for each volume affected by the failure. Do not
recover the Schema and [Root]; they are restored from a replica. You also
do not need to recover Server Specific Info again. When prompted,
suppress further prompting and overwrite files.
4. When you are prompted, log in using the full name of the backup user.
5. If the failed server had non-SYS volumes that were not affected by the
failure, from the [F2] File menu in the Browser window, select Recover to
display the NetWorker Recover Options dialog box. Select the Don’t
Overwrite Data; restore trustees, etc. command, and then recover the
volumes that were not affected by the failure.
6. Shut down and restart the repaired or replaced server.