Filter
Top Products
Legato NetWorker, Release 7.0
Disaster Recovery Guide
Chapter 5: NetWare Disaster Recovery
5
105
Task 3: Complete the Recovery of the NetWare 4.10 SYS Volume
To complete the recovery of a NetWare 4.10 SYS volume:
1. If necessary, use NDS Manager or dsrepair to re-establish replicas on the
repaired or replaced server.
2. Enter the following commands at the command prompt:
LOAD TSA410
LOAD TSANDS
LOAD TSA500
3. From the Recover Browser window, recover the server object, volume
objects, and any objects that formerly referenced the recovered volume or
server objects. Expand the [Root] resource, mark the required objects, and
then select Recover. When prompted, suppress further prompting and
overwrite files.
4. Use NDS Manager or the Schedule immediate synchronization function of
dsrepair to synchronize the replica on all servers.
5. Verify the recovered data. From a workstation, use either the nwadmin
server utility or the ndir workstation utility to check the data, trustee
assignments, file ownership, and other related information.
The SYS volume should now be restored.
How to Recover a NetWare 4.11, NetWare 5.0, or IntraNetWare Server
SYS Volume
To recover a SYS volume on a NetWare 4.11, NetWare 5.0, or IntraNetWare
server, complete the following tasks:
• “Task 1: Recover the NetWare SYS Volume” on page 106
• “Task 2: Install the Operating Systems” on page 107
• “Task 3: Complete the NetWare SYS Volume Recovery” on page 108
Important: For NetWare 4.11/IntraNetWare servers, do not delete the server
or volume objects for the failed volume from the NDS tree; you do not want to
eliminate any references other objects might have to the volume. If you must
delete objects on a NetWare 4.11/IntraNetWare server, use the NetWare 4.10
procedure for recovering from a disaster.