Filter
Top Products
Legato NetWorker, Release 7.0
Disaster Recovery Guide
Chapter 11: Legato AAM for AIX, HP-UX, and Linux Disaster Recovery
11
161
2. On the primary node, enter the scanner command to restore the following
configuration files:
scanner -S saveset_id device_path -x uasm -rv -i Y path_name
where the device_path is the platform configuration and system files listed
in step 1.
Task 3: Configure NetWorker Software as a Highly Available Application
On the primary node, configure the NetWorker software as a highly available
application:
1. Run the envsh script. For example:
AIX
cd /usr/lpp/LGTOlcxx/bin
. ./envsh (or source ./envcsh if using C shell)
HP-UX
cd /opt/LGTOlcxx/bin
. ./envsh (or source ./envcsh if using C shell)
Linux
cd /opt/LGTOlcxx/bin
. ./envsh (or source ./envcsh if using C shell)
2. Run the networker.cluster script:
If you have already restored the nw_ux.lc file, answer No to the following
prompt:
Do you wish to automatically add site-specific values for:
NSR_SHARED_DISK_DIR and NSR_SERVICE_ID in
/AAM_ installation_ directory
Yes or No [Yes]? no
3. Start the cluster virtual server, as follows:
$FT_DIR/bin/ft_startup -domain domain_name
4. Use the AAM Console to start the NetWorker resource group.