Filter
Top Products
Legato NetWorker, Release 7.0
Disaster Recovery Guide
Chapter 7: Microsoft Cluster Disaster Recovery (Windows 2000 and .NET)
7
131
8. In the Destination Client dialog box, select Node_A.
9. In the Recover window, mark the SYSTEM STATE save set. The cluster
database is a component of the Windows system state, and is
automatically backed up or restored with the SYSTEM STATE save set.
Note: It is strongly recommended that you restore all of the SYSTEM save
sets (SYSTEM STATE, SYSTEM DB, and SYSTEM FILES). For more
information, refer to the Legato NetWorker Administrator’s Guide, Microsoft
Windows Version.
10. Click Start to begin the recovery.
11. After the recovery, reboot Node_A.
12. Using Cluster Administrator on Node_A, confirm that the cluster
resources were restored to the point in time when the backup occurred. If
you have been performing regular scheduled backups, this will recover
the cluster database to a point in time shortly before the loss of Node_B.
13. Start the Cluster service on Node_B using one of the following methods:
• Using the Control Panel Services tool, start the Cluster service.
• At the command prompt, run:
net start clussvc
14. Using the Cluster Administrator on Node_A, monitor the cluster joining
status of Node_B.
15. Using the Cluster Administrator on Node_B, verify that the cluster group
can be moved between the nodes by right-clicking the group and selecting
Move group.