Filter
Top Products
Legato NetWorker, Release 7.0
Disaster Recovery Guide
3
Prerequisites
36
Task 4: Recover the NetWorker Server Bootstrap
You can use the mmrecov command to recover the NetWorker server
bootstrap.
Note: In NetWorker release 6.0 and later, the mmrecov command is only used
to recover the NetWorker server’s media database and resource database; the
nsrck command is used to recover the server’s client file indexes.
To recover the NetWorker server bootstrap:
1. Use the mmrecov command to recover the NetWorker server’s bootstrap
(media database and resource database). For example:
mmrecov
Output similar to the following appears:
mmrecov: Using madrid.spain.com as server
Important: The mmrecov command overwrites the server’s media database. It
does not overwrite the resource database, instead mmrecov recovers it to the
resource directory, res.R. For syntax and option information about mmrecov,
refer to the Legato Command Reference Guide.
2. If the server has multiple devices configured and enabled, the following
message appears. If you receive this message, enter the name of the device
you are using for the recovery.
What is the name of the device you plan on using
[/dev/rmt/0hbn]? /dev/rmt/0hbn
3. When the following message appears, enter the save set ID for the latest
bootstrap. If you are recovering a cloned version of the bootstrap, specify
the save set ID associated with the clone.
Enter the latest bootstrap save set ID []: 20076
4. When the following message appears, enter the file number to begin the
recovery. If unknown, press [Enter].
Enter starting file number (if known) [0]: 130
5. When the following message appears, enter the first record number to
begin the recovery. If unknown, press [Enter].
Enter starting record number (if known) [0]: 0
6. When the following message appears, follow the prompt: