Filter
Top Products
Legato NetWorker, Release 7.0
Disaster Recovery Guide
Chapter 3: UNIX Disaster Recovery
3
37
Please insert the volume on which save set id 20076 started
into /dev/rmt/0hbn.
Once you have loaded the appropriate volume, the following message
appears:
Scanning /dev/rmt/0hbn for save set 20076; this might take
a while...
NetWorker then scans the volume for the appropriate save set and
recovers it. The NetWorker media database and resource database are
recovered when the following message appears:
If your resource files were lost, they are now recovered
in the ‘res.R’ directory. Copy or move them to the ‘res’
directory, after you have shut down the service. Then
restart the service.
Otherwise, just restart the service.
If the on-line index for the server-name was lost, it
can be recovered using the nsrck command.
Task 5: Rename the NetWorker Server Configuration Files
Because the configuration files cannot be reliably overwritten while the
NetWorker software is running, mmrecov recovered the res directory as res.R
by default. In addition, mmrecov might have recovered another server’s
configuration file in this directory.
To rename the configuration files:
1. Stop the daemons by entering the nsr_shutdown command at the
command line:
nsr_shutdown -a
2. Rename the existing /nsr/res directory to /nsr/res.orig:
mv res res.orig
3. Rename the recovered /nsr/res.R directory to /nsr/res:
mv res.R res
4. Restart the NetWorker server by first entering the nsrexecd command,
then entering the nsrd command, for example:
nsrexecd
nsrd