Filter
Top Products
Legato NetWorker, Release 7.0
Disaster Recovery Guide
4
Repairing Windows NT 4.0
58
• The NetWorker server you will use for the recovery includes in its
Administrator list the account you will use to recover the REPAIRDISK
save set.
For details about meeting these requirements, refer to the Legato NetWorker
Administrator’s Guide, Microsoft Windows Version.
How to Use the NetWorker User Program to Create an ERD
To create an ERD using the NetWorker User program:
1. Start the NetWorker User program.
2. Insert a blank, formatted disk in the A: drive.
3. Click the Recover toolbar button.
4. In the Source Client dialog box, select the computer you are recovering
and click OK.
5. In the Destination Client dialog box, select the computer you are using to
create the ERD and click OK.
6. Mark the REPAIRDISK save set for recovery.
7. From the Options menu, select Recover Options.
8. In the Relocate Recovered Data To dialog box, enter A:\ and click OK.
9. Click the toolbar Start button to begin recovery of the REPAIRDISK save
set to the disk in the A: drive.
Important: If the REPAIRDISK save set is larger than 1.44 MB, it will not fit on
a disk. This is a known limitation of the Windows NT 4.0 operating system; no
workaround is available.
How to Use the NetWorker recover Command to Create an ERD
Important: The NetWorker recover.exe program is located in
<NetWorker_install_path>\bin. There is also a Windows system command
named recover.exe, located in %SystemRoot%\System32. To avoid executing
the Windows version of recover.exe when attempting to execute the
NetWorker command, you should do one of the following: