Filter
Top Products
Appendix E • ADTRAN Total Access 600R
1037753-0001 Revision A
115
11. When all channels are configured, press CTRL+W to save
the changes.
12. Press H to return to the Home menu.
13. Press CTRL+L to log out as shown in Figure 102.
Confirming connectivity
To confirm connectivity to the NAP, ping the Far-End IP Address.
You entered this address from your FSO during the setup
procedures. Ping this address as shown in sample
Figure 103.
Confirm the ping is successful and proceed to Chapter 2 –
Preparing the HN router for installation on page 5.
Figure 102: Log out screen
Figure 103: Ping Far-End IP address