Filter
Top Products
Chapter 3 • Assembling and connecting the HN router hardware
10
1037753-0001 Revision A
Attaching the base
To attach the base to the router:
1. Position the router and pedestal base Figure 3.
2. Starting with the router bottom about ½ inch from the bottom
of the pedestal base, slide the router into the base until the
router locks into position.
Removing the base
If you need to remove the router from the pedestal base:
1. Pull the release tab on the bottom of the base down. (See
Figure 3.)
2. Slide the base away from the router.
Figure 3: Attaching the router to the pedestal base