Filter
Top Products
Appendix B • Updating the router software
1037753-0001 Revision A
77
Appendix B
Updating the router software
This appendix explains how to use the Fallback Updater utility to
update the router
fallback.bin file with the current software
release. Use the procedures in this appendix only when instructed
to do so by Hughes.
Before updating the fallback.bin file and installing the router,
you must first copy the Fallback Updater utility to the installer
laptop. The utility is distributed to installers in an e-mail message
and is also available for download from the Hughes installation
support Web site. Contact Installer Support for the Web site
address, if necessary.
This appendix covers the following topics:
• Saving the utility on the installer laptop on page 77
• Configuring TCP/IP properties on the installer laptop on
page 78
• Updating the fallback.bin file on page 86
• Troubleshooting on page 87
Saving the utility on the
installer laptop
Follow these steps to save the Fallback Updater utility on your
(the installer) laptop:
1. Obtain the self-extracting file containing the utility and its
supporting files from either the e-mail message or the
installation support web site.
2. Copy the self-extracting file to the laptop.