Filter
Top Products
Appendix A • Configuring a computer to support DHCP
1037753-0001 Revision A
69
Appendix A
Configuring a computer to support
DHCP
This appendix explains how to configure a computer to support
Dynamic Host Configuration Protocol (DHCP). All HN routers
come from the factory with DHCP enabled. Therefore, the
computer must have DHCP enabled and set to obtain IP addresses
automatically.
This appendix covers the following topics:
• Windows Vista on page 69
• Windows XP on page 72
• Windows 2000 on page 75
Windows Vista
1. From the Windows desktop, select Start → Settings →
Network Connections.
A list of network adapters appears as shown in Figure 62. The
Local Area Connection-NIC Card must appear under the LAN