Filter
Top Products
Chapter 1 • Introduction
1037753-0001 Revision A
1
Chapter 1
Introduction
This manual explains how to install, commission, and service the
Hughes HN7700S as a Terrestrial Broadband Router (HN router).
The manual also includes installation information for the DSL
and T-1 transport methods used with the HN router. This chapter
discusses the following topics:
• Scope and audience on page 1
• HN router overview on page 1
• Router specifications on page 2
• Commissioning on page 3
• Installation and commissioning steps on page 4
The HN7700S has dual functions. This manual covers the
HN7700S’ function as a router. It is also used as a VSAT
terminal.
Scope and audience
This manual is intended for use by the following audiences:
• Professional installers
• Installer trainers, who prepare separate instructions for the
installers
• Call center operators, who respond to customers’ calls
• Call center trainers, who train call center operators
This manual is intended for use in the United States and Canada.
Certain information may vary depending on the customer’s
location. This manual identifies such differences where
applicable.
In this guide, the term HN router refers to the HN7700S acting as
a router. Transport devices refer to the Siemens 4100/4101
SpeedStream Modem or the ADTRAN Total Access 660R T-1 line.
HN router overview
The HN router, as shown in Figure 1 on page 2, is a standalone
unit that provides an integrated broadband LAN solution to
platforms running IP over Ethernet. The HN router provides two
10/100 LAN ports with one being used for local LAN
connectivity and one being used for WAN connectivity. The
Ethernet LAN port can be connected via a straight-through or