Filter
Top Products
Chapter 5 • Commissioning the HN router
24
1037753-0001 Revision A
3. Select the appropriate file.
4. Click the Upload button.
5. The system displays a confirmation screen as shown in
Figure 13 indicating the the file was successfully transferred.
6. Click the Close button.
7. The system returns to the SCC home page.
Commissioning by auto
selection
Commissioning by auto selection is the preferred method of
commissioning the HN router. By selecting this option the
commissioning parameters are automatically configured based on
the network access provider (NAP) chosen.
Selecting and verifying the
NAP
To select the network access provider:
1. At the Terrestrial Broadband Setup screen as shown in
Figure 14, click the Registration - Installer link.
Figure 13: Configuration file confirmation