Filter
Top Products
Appendix A • Configuring a computer to support DHCP
76
1037753-0001 Revision A
3. Ensure that Client for Microsoft Networks and Internet
Protocol (TCP/IP)
are installed and checked. If NetBEUI is
installed, uninstall it.
4. Select Internet Protocol (TCP/IP). Be careful not to uncheck
the check box.
5. Click Properties. The Internet Protocol Properties window
appears as shown in
Figure 67.
6. Ensure that both Obtain an IP Address Automatically and
Obtain DNS Server Address Automatically are selected. If
not, select them.
7. Click OK to close the dialog boxes and finish the
configuration.
8. Restart the computer even if Windows does not require you to
do so. This ensures that the network settings are
automatically reset.
Figure 67: Internet Protocol Properties - Windows 2000