Filter
Top Products
Chapter 3 • Assembling and connecting the HN router hardware
1037753-0001 Revision A
11
Selecting the router
location
Select a location for the router that will accommodate all required
cable connections, including the power source. Place the router in
the desired location.
Connecting the power
supply
Begin installation of the router by connecting the correct power
supply. Use the power supply shipped with the router. Refer to
Table 2 and Figures 4 and 5 to ensure you have the correct power
supply type (AC/DC or DC/DC) for the unit.
CAUTION
• Do not block any ventilation openings. Do not place the
router near heat sources such as radiators, heat
registers, ovens, stoves, or other apparatus (including
amplifiers) that produce heat.
• Leave 6 inches of space around the top and sides of the
router to ensure ventilation and prevent overheating.
CAUTION
• Always use the power supply provided with the system.
The HN router’s performance may suffer if the wrong
power supply is used.
• If the HN router is installed outside the United States or
Canada, observe the power standards and requirements
of the country where it is installed.
Table 2: Available power supplies for the HN router
Application
Power
supply type
Part number Electrical requirements Power cord
HN router AC/DC (64 W) 1500089-0001 Input line voltage:
100 – 240 V, 2 A max.
Input line frequency:
50 – 60 Hz AC
Rated power consumption:
64 W
Detachable, for
110
VAC outlet type
DC/DC 1033554-0001 Input line voltage:
12.7 – 25 V, 10 A max.
Rated power consumption:
64 W
Detachable power
input cables and
connector