Filter
Top Products
Appendix F • Siemens 4100/4101 DSL Modem
1037753-0001 Revision A
119
• The Internet LED should remain a solid green.
• The Activity LED may blink.
Installing the modem
To establish a connection from your computer to the modem:
1. After connecting the modem, power up your laptop.
2. Click the icon appears on the screen that was downloaded
from the installer portal.
Notice that the Power, Ethernet, and DSL LEDs on the modem
will turn green.
The installation interface
The installation process is an automated process composed of the
following steps:
• Searching for the device.
• Installing the device.
• Downloading firmware.
• Rebooting the system.
• Exiting the application.
The installation procedure
Use the following procedure to install the modem:
1. Double-click the Siemens installation icon as shown in
Figure 104.
2. The Searching for device screen displays as shown in 105.
Figure 104: Installation icon
Note: The installation status appears in the message bar at the
bottom of the screen. The main pane of the window does not
change.