Filter
Top Products
Appendix B • Updating the router software
84
1037753-0001 Revision A
7. Select Use the following IP address.
8. Type 192.168.0.2 in the IP address field.
9. Type 255.255.255.252 in the Subnet mask field.
10. Click OK.
11. Restart the computer even if Windows does not require you to
do so. This ensures that the network settings are
automatically reset.
Windows 2000
1. Connect the laptop to the router with an Ethernet cable.
2. From the Windows desktop on the installer laptop, select
Start → Settings → Control Panel, then double-click the
Network and Dial-up Connections icon.
A list of network adapters appears as shown in Figure 75.
A Local Area Connection icon must appear on the page. If it
does not, the network is not installed correctly.
3. Right-click the Local Area Connection icon that represents
the network adapter connecting the computer to the router
and select
Properties. The Local Area Connections Properties
window appears as shown in
Figure 76.
Note: You do not need to enter information in the Default
gateway, Preferred DNS server, or Alternate DNS server
fields.
Figure 75: Network and Dial-up Connections - Windows 2000