Filter
Top Products
Understanding the printer messages
106
Understanding the printer messages
Printing Quality Test
Pages
The printer is formatting and printing
the Print Quality Test, which consists of
4 pages. Page 1 contains a mixture of
graphics and text, pages 2 and 3
contain only graphics, and page 4 is a
blank page. If Duplex is turned on, then
the pages will be duplexed; otherwise,
they are simplexed.
Wait for the message to clear.
Prog Engine Code
DO NOT POWER OFF
The printer is programming new
engine code.
Wait for the message to clear and the
printer to reset.
Warning: Do not turn the printer off
while this message is displayed.
Prog System Code
DO NOT POWER OFF
The printer is programming new
system code.
Wait for the message to clear and the
printer to reset.
Warning: Do not turn the printer off
while this message is displayed.
Program Flash
DO NOT POWER OFF
The printer is storing resources, such
as fonts or macros, in flash memory.
Wait for the message to clear.
Warning: Do not turn the printer off
while this message is displayed.
Queuing and Deleting
Jobs
The printer is deleting one or more
held jobs and sending one or more
jobs to print.
Wait for the message to clear.
See also: Using the Print and Hold
function
Queuing Jobs The printer is sending one or more
held jobs to print.
Wait for the message to clear.
See also: Using the Print and Hold
function
Ready The printer is ready to receive and
process print jobs.
Send a job to print.
Ready Hex The printer is in Hex Trace mode and is
ready to receive and process print
jobs.
• Send a job to print. All data sent to
the printer is printed in hexadecimal
and character representation.
Control strings are printed, not
executed.
• Turn the printer off and then on to
exit Hex Trace mode and return to
Ready status.
Remove Paper Standard
Bin
The standard output bin is full. Remove the stack of paper from the
output bin to clear the message.
Res Reduced The printer is reducing the resolution of
a page in the current job from 600 dots
per inch (dpi) to 300 dpi to prevent a
38 Memory Full error. Res Reduced
remains on the display while the job
prints.
Press Menu to open the Job Menu and
cancel the current job.
Resetting
Maint Cnt Value
The printer is resetting the counter that
tracks wear on the fuser.
Wait for the message to clear.
Message What this message means What you can do