Filter
Top Products
Loading and using the multipurpose feeder
37
Print media
• Load transparencies with the recommended print side face up and the top edge going in first.
Warning: Never use envelopes with clasps, snaps, windows, coated linings, or self-stick
adhesives. These envelopes may severely damage the printer.
• Load envelopes with the flap side down and the stamp area going in last.
Note: For best results, peel-and-stick envelopes should exit to the rear output bin. Open
the rear output bin when printing on these envelopes.
Do not feed stamped envelopes. The stamp and addresses are shown for envelope
orientation only.