Filter
Top Products
Understanding the printer messages
111
Understanding the printer messages
56 Standard USB Port
Disabled
Data has been sent to the printer
through a USB port, but the USB port
is disabled.
•Press Go to clear the message. The
printer discards any data received
through the USB port.
• Make sure the USB Buffer menu
item in the USB Menu is not set to
Disabled.
See also: USB Buffer
58 Too Many
Flash Options
Too many flash memory options are
installed on the printer.
Turn off and unplug the printer.
Remove the excess flash memory.
Plug in the printer and turn it on.
58 Too Many
Trays Attached
Too many drawers with matching trays
are installed on the printer.
Turn off and unplug the printer.
Remove the additional drawers. Plug in
the printer and turn it on.
See also: Setup Guide
80 Scheduled
Maintenance
The printer requires replacement of
routine maintenance items to maintain
top performance and avoid print quality
and paper feed problems.
Replace the maintenance items and
press Go to clear the message.
88 Toner Low The printer has detected that the toner
supply in the print cartridge is low. If
you do not have a print cartridge on
hand, order one now.
• Shake the print cartridge to utilize
the remaining toner.
• Replace the cartridge.
•Press Go to clear the message and
continue printing. The Supplies
message is displayed until you
replace the cartridge.
See also: Changing the print
cartridge
900–999 Service
<message>
Messages labeled 900–999 relate to
printer problems that may require
printer service.
Turn the printer off and check all cable
connections. Turn the printer back on.
See also: Contacting service
Message What this message means What you can do