Filter
Top Products
Using the printer menus
90
Understanding the operator panel
PCL Emul Menu
Use the PCL Emul Menu to change printer settings that only affect jobs using the PCL emulation
printer language.
Note: Values marked by an asterisk (*) are the factory default settings.
Menu item Purpose Values
A4 Width
To select the width of the logical
page for A4 size paper.
198 mm* Makes the logical page compatible
with the Hewlett-Packard LaserJet
5 Printer.
203 mm Makes the logical page wide
enough to print eighty 10-pitch
characters.
Auto CR
after LF
To specify whether the printer
automatically performs a carriage
return after a line feed control
command.
Off* Printer does not perform a carriage
return after a line feed control
command.
On Printer performs a carriage return
after a line feed control command.
Auto LF
after CR
To specify whether the printer
automatically performs a line feed
after a carriage return control
command.
Off* Printer does not perform a line
feed after a carriage return control
command.
On Printer performs a line feed after a
carriage return control command.
Font Name
To choose a specific font from the
specified font source.
R0 Courier 10* The font name and font ID for all
fonts in the selected font source
are displayed. The font source
abbreviation is R for resident, F for
flash, K for disk, and D for
download.
Font Source
To determine the set of fonts
displayed in the Font Name menu
item.
Resident* Displays all fonts resident in printer
RAM when the printer ships from
the factory.
Download Displays all fonts downloaded to
printer RAM.
Flash Displays all fonts stored in flash
memory.
All Displays all fonts available to the
printer from all sources.