Filter
Top Products
Using the printer menus
78
Understanding the operator panel
Paper
Weight
To identify the relative weight of the paper loaded in a specific source and ensure that the
toner adheres properly to the printed page.
1 Select a paper type.
Note: If a user-defined name is
available, it is displayed instead of
Custom <x> Weight. The name is
truncated to 14 characters.
Plain Weight
CardStock Weight
Trnsprncy Weight
Preprint Weight
Colored Weight
Custom <x> Weight
Bond Weight
Envelope Weight
Labels Weight
Ltrhead Weight
2 Select a value. Light
Normal*
Heavy
Substitute
Size
To have the printer substitute the
specified paper size if the
requested size is not loaded.
Off Printer prompts the user to load
the requested paper size.
Statement/A5 Prints A5 size jobs on statement
size paper if only statement size
paper is loaded, and prints
statement size jobs on A5 paper if
only A5 paper is loaded.
Letter/A4 Prints A4 size jobs on letter size
paper if only letter size paper is
loaded, and prints letter size jobs
on A4 size paper if only A4 size
paper is loaded.
All Listed* Substitutes Letter/A4 and
Statement/A5.
Universal
Setup
To determine the default size when the Paper Size setting for a tray or feeder is Universal.
1 Select a unit of measure.
(* Denotes a country/region-
specific factory default value)
Inches*
Millimeters*
2 Select the values. Portrait Width =3.00–14.17 in. (8.5 in.*)
=76–360 mm (216 mm*)
Portrait Height =3.00–14.17 in. (14 in.*)
=76–360 mm (356 mm*)
Feed Direction =Short Edge*
=Long Edge
Menu item Purpose Values