Filter
Top Products
110 J.D. Edwards’ OneWorld B73.3 and Windows Terminal Server
• Authorization Code
To continue with your installation, you will need to obtain an authorization
code. You must call J.D. Edwards at 303-334-4000 (ask for Contracts). You will
need to provide your J.D. Edwards’ Address Book number and the serial
number that appears on the screen, the expiration data, and the number of
licenses.
Note: You may be instructed to leave a telephone number and someone from
contracts will give you a call back. It is important that you have a telephone
near the deployment server you’re about to set up.
5. The contracts’ representative will give you an authorization code while on the
telephone. You will enter this code into the Authorization Code field and click
Next. You will see a screen similar to Figure 44.
Figure 44. OneWorld Setup Options Screen
6. In the components area, we performed the following steps for our example:
• Click Change Directory and enter
D:\ONEWORLD\B733 as the path.
7. For this example, the following components were selected:
• OneWorld
• Production Path Code
• CRP Path Code
Note: Only the CRP (Conference Room Pilot) and the Production Path
Code will be installed for this example. However, this should be changed,
depending on your client or customer specifications.
8. Click Next to continue.
9. The program now installs the ODBC Access 7.0 drivers and begins copying its
file to the deployment server. After the files have completed loading, you will
see a screen similar to Figure 45 on page 111.