Filter
Top Products
152 J.D. Edwards’ OneWorld B73.3 and Windows Terminal Server
7.4.1.3 Start the OneWorld Enterprise Server
To start the OneWorld enterprise server, perform the following steps:
1. From the Windows NT interface, click
Start > Settings > Control Panel.
Select the Services icon.
2. Choose the
JDE B733 Network services and click Start.
3. Next, choose the JDE B733 Queue services and click Start.
Note: You must always start Network, then Queue services. Information on
stopping these services correctly can be reviewed in the Stopping OneWorld
Enterprise Server Processes in the reference section of J.D. Edwards’
OneWorld
Installation
Guide (Windows NT-Based Systems), Release B73.3.
7.5 Setting Up a Printer on the OneWorld Enterprise Server
In this section, these procedures are performed to set up a printer for our
OneWorld enterprise server, however, depending on the customer or clients,
these steps may be different. The following tasks will be done on the deployment
server in the deployment environment (DEPB733):
• Adding a paper type.
• Adding a physical printer.
• Defining a conversion program.
• Adding a logical printer.
• Adding a Default Logical Printer.
7.5.1 Adding a Paper Type
In this section, we begin our printer setup by adding a paper type. Log on to the
OneWorld deployment server in the deployment environment DEPB733).
1. On the Printers menu (GH9013), select Work with Paper Types (P98616).
2. Click Add. You will see a screen similar to Figure 94 on page 153.