Filter
Top Products
248 J.D. Edwards’ OneWorld B73.3 and Windows Terminal Server
8.7 Installing OneWorld Client
The workstation installation copies all necessary components of OneWorld to a
client workstation. To prepare for the OneWorld client installation, we will perform
the following steps:
• Modify the JDE.INI file on the deployment server.
• Modify the Setup.inf file on the deployment server.
8.7.1 Modify the JDE.INI File on the Deployment Server
You must modify the JDE.INI file on the deployment server prior to installing
OneWorld on your workstations. To begin, perform the following steps:
1. On the deployment server, sign on as JDE.
2. If necessary, edit the JDE.INI on the deployment server.
• [JDENET]
Set the serviceNameListen and serviceNameConnect parameters to match
those in the enterprise server JDE.INI.
3. To ensure the workstation will be set up correctly (such as for National
Language Support), make the following changes to the JDE.INI file in the
OneWorld\B733\Client\Misc directory on the deployment server:
• [INSTALL]
Verify that the LocalCodeSet parameter is set to the appropriate language
value. Also, verify that your code page is set up properly. For appropriate
values and code pages, see the "National Language Support" section of
the
OneWorld Installation Guide (Windows NT-Based Systems), Release
B73.3
.
• [NETWORK QUEUE SETTINGS]
Set the UBEQueue parameter appropriately. This parameter is set
automatically but should be checked.
Note: You can resynchronize replicated data by changing the ForcedSync value
in the [REPLICATION] section from 0 to 1. When client workstations are installed,
this value is set to 0, meaning you do not want to resynchronize data.
8.7.2 Modify the Setup.inf File on the Deployment Server
In this section, Setup.inf will be modified to specify the default environment.
Note: You do not need to perform this task if you want the default environment to
be Production (PRD733).
Complete the following steps if your default environment is CRP:
1. From Windows Explorer, open Setup.inf, which is in the OneWorld\B733\Client
directory.
2. In the [DB SYSTEM SETTINGS] section, set the Default Env parameter to the
valid environment you want to be the default. In our example, we typed
CRP733.
3. In the [DB SYSTEM SETTINGS] section, set the Default PathCode parameter
to the valid path code you want to be the default (this should match the
environment). In our example, we typed
CRPB733.