IBM B73.3 Server User Manual


 
84 J.D. Edwards’ OneWorld B73.3 and Windows Terminal Server
6.3.1 Installing Windows NT Server 4.0 Using the SoftwareGuide CD
Start the SoftwareGuide bootable CD-ROM by placing it in the CD-ROM drive of
your server and reboot the system. After the POST test runs, SoftwareGuide
boots and the ServerGuide language selection screen appears. Complete the
following instructions for a successful installation:
1. Select the language that you want to use during the software installation
process. There are five options:
English
French
•German
Spanish
Italian
For this installation process, we selected English.
2. The country and keyboard selection screen is displayed. A left arrow, right
arrow and question mark now appear at the bottom of the screen. Selecting
the question mark gives you help information on the displayed screen. The left
arrow will take you to the previous screen and the right arrow will take you to
the next screen. These buttons perform the same functions on many of the
following screens on which they appear.
3. Select the appropriate country and keyboard for your software. For this
installation process, select United States as the country and United States
for the keyboard. Select > to continue.
4. At the Main Menu, there are six options:
README Hints and Tips
•Overview
Product Registration
Diskette Factory
Operating System Installation
Introduction to CoPilot Application Guide
Select Operating System Installation.
5. The ServerGuide Operating System selection screen appears and it has four
options:
Novell IntranetWare
Microsoft Windows NT Server
IBM OS/2
SCO OpenServer
Select Microsoft Windows NT Server.
6. The Selecting a Windows NT Server 4.0 Version and Installation Method
screen appears. Ensure that the following are selected for Version and
Method for Windows NT Server CD Installation:
Windows NT Server Release 4.0
Customized Installation