IBM B73.3 Server User Manual


 
Implementing Microsoft SQL Server 7.0 and OneWorld 239
however the basic steps are shown below. For Paper Type Revisions, enter the
following fields:
Paper Type = Select the paper type that you are going to use.
Paper Heights = Specify the height of the paper for this paper type.
Paper Width = Specify the width of the paper for this paper type.
Unit of Measure = Indicate the unit of measure in which the paper height
and width are entered.
4. Click OK and then Cancel to continue.
8.5.2 Adding a Physical Printer
In this section, we will add a physical printer to our OneWorld setup. Complete
the following steps:
1. On the Printers (GH9013), choose Work with Physical Printers (P98616).
2. Click Add. You will see a screen similar to Figure 194:
Figure 194. Work With Physical Printers (Physical Printer Revisions) Screen
3. Complete the required fields:
Physical Printer = Name of the printer that exists on you network.
The Windows NT format is:
\\enterprise server name\printer name.
For our example, we used: \\IBM5500ES\IBM40375.
Capability Type = Select the type of capability that is required for OneWorld
to print properly. For our example, H (Host) was chosen first.