Filter
Top Products
146 J.D. Edwards’ OneWorld B73.3 and Windows Terminal Server
Figure 88. Package Workbench Screen
15.On the Package Workbench screen, review the Conference Room Pilot (CRP)
and Production (PROD) packages. From the action bar, click Form >
Configure.
16.Click Next to finish the plan. From the action bar, click Form > Finish.
7.3.6 Setting Up and Verifying the Hosts File
If no Domain Naming Service is defined on your network, you must set up the
hosts file for each machine. The following procedure must be completed on each
machine on your network to ensure each machine can identify the other:
1. From Windows Explorer, access \Winnt\System32\Drivers\Etc\Hosts.
2. Add the Machine IP address and Machine name (enterprise server) in your
hosts file:
• 192.168.254.4 ibm5500es #The OneWorld enterprise server
• 192.168.254.2 ibm5500ds #The OneWorld deployment server
Verify that you entered the address and name on a separate line. A pound sign
(#) marks the start of a comment, and the end-of-line character marks the end
of a comment.
Note: Again, if you use the Domain Naming Service (DNS) or the Windows
Internet Services (WINS), you do not need to set up and verify the hosts files.