Filter
Top Products
__ 3. For Windows NT, any user account that does not belong to the guests
group. This user account will be used to perform the installation.
Performing the Installation
To install your DB2 product, perform the following steps:
Step 1. Log on to the system with the user account that you created to
perform the installation.
Step 2. Shut down any other programs so that the setup program can update
files as required.
Step 3. Insert the CD-ROM into the drive. The auto-run feature automatically
starts the setup program. The setup program will determine the
system language, and launch the setup program for that language. If
you want to run the setup program in a different language, or the
setup program failed to auto-start, see the tip that follows.
To manually invoke the setup program, perform the following steps:
a. Click on Start and select the Run option.
b. In the Open field, enter the following command:
x:\setup /i language
where:
v x: represents your CD-ROM drive
v language represents the country code for your language (for
example, EN for English). Table 8 on page 159 lists the code for
each available language.
c. Click on OK.
32 Quick Beginnings