Filter
Top Products
You must define the SNASVCMG logon mode when using APPC.
Configuring DB2 Universal Database for OS/390
Before you can use DB2 Connect, your DB2 Universal Database for OS/390
Administrator must configure DB2 Universal Database for OS/390 to permit
connections from DB2 Connect workstations. This section indicates the
minimum updates required in order to permit a DB2 Connect client to make a
connection to the DB2 Universal Database for OS/390 database server. For
more detailed examples, refer to the Connectivity Supplement, and the DB2 for
OS/390 Installation Reference.
The following tables need to be updated, depending on the type of
connections you are using (SNA or TCP/IP):
v SYSIBM.LUNAMES for SNA connections
v SYSIBM.IPNAMES for TCP/IP connections
----+----1----+----2----+----3----+----4----+----5----+----6----+----7---
RDBMODES MODTAB
IBMRDB MODEENT LOGMODE=IBMRDB, DRDA DEFAULT MODE *
TYPE=0, NEGOTIABLE BIND *
PSNDPAC=X'01', PRIMARY SEND PACING COUNT *
SSNDPAC=X'01', SECONDARY SEND PACING COUNT *
SRCVPAC=X'00', SECONDARY RECEIVE PACING COUNT *
RUSIZES=X'8989', RUSIZES IN-4K OUT-4K *
FMPROF=X'13', LU6.2 FM PROFILE *
TSPROF=X'07', LU6.2 TS PROFILE *
PRIPROT=X'B0', LU6.2 PRIMARY PROTOCOLS *
SECPROT=X'B0', LU6.2 SECONDARY PROTOCOLS *
COMPROT=X'D0B1', LU6.2 COMMON PROTOCOLS *
PSERVIC=X'060200000000000000122F00' LU6.2 LU TYPE
SNASVCMG MODEENT LOGMODE=SNASVCMG, DRDA DEFAULT MODE *
PSNDPAC=X'00', PRIMARY SEND PACING COUNT *
SSNDPAC=X'02', SECONDARY SEND PACING COUNT *
SRCVPAC=X'00', SECONDARY RECEIVE PACING COUNT *
RUSIZES=X'8585', RUSIZES IN-1K OUT-1K *
FMPROF=X'13', LU6.2 FM PROFILE *
TSPROF=X'07', LU6.2 TS PROFILE *
PRIPROT=X'B0', LU6.2 PRIMARY PROTOCOLS *
SECPROT=X'B0', LU6.2 SECONDARY PROTOCOLS *
COMPROT=X'D0B1', LU6.2 COMMON PROTOCOLS *
PSERVIC=X'060200000000000000000300' LU6.2 LU TYPE
Figure 12. Sample VTAM Log Mode Definition for DB2 Connect
44 Quick Beginnings