Filter
Top Products
f. Click on OK.
Step 2. Configure Devices
a. In the Configuration options field, select Configure devices.
b. Ensure that in the DLCs field, the appropriate DLC is highlighted.
For example, LAN.
c. Click on the New push button. The appropriate window appears
with default values displayed. For example, the Define a LAN
device window.
d. Click on OK to accept the default values.
Step 3. Configure the Gateway
a. In the Configuration options field, select Configure the Gateway,
then click on the New push button. The Define Gateway window
appears.
b. Click on the SNA Clients tab.
c. Ensure that there is a check mark in the Enable SNA API Client
Services check box.
d. Click on OK to accept the default values.
Step 4. Configure Connections
a. In the Configuration options field, select Configure connections.
b. Ensure that in the DLCs field, LAN is highlighted.
c. Click on the New push button. The Define a LAN connection
window appears.
d. On the Basic tab panel:
1) In the Link station name field, type in the name (7)from
the worksheet (LINKHOST).
2) In the Destination address field, type in the address (8)
from the worksheet (400009451902).
e. On the Security tab panel:
1) In the Adjacent CP name fields, type in the network ID (3)
and the Control Point name (4)(SPIFNET.NYX).
2) In the Adjacent CP type field, select the appropriate CP type
(eg. Back-level LEN).
3) Ensure that TG number is set to 0 (the default).
4) Click on OK.
Step 5. Configure Partner LU 6.2
a. In the Configuration options field, select Configure partner LU,
then click on the New button. The Define a partner LU 6.2
window appears.
b. In the Partner LU name fields, type in the network ID (3) and
the partner LU name (2)(SPIFNET.NYM2DB2).
Chapter 7. Configuring APPC Communications on the DB2 Connect Workstation 73