Filter
Top Products
Note: Continuations must begin in column 16, with continuation marks in
column 72.
Sample VTAM PU and LU Definitions for DB2 Connect
If your security policies allow it, it is recommended that you enable DYNPU and
DYNLU in VTAM to allow any PU and LU access through VTAM. Contact your
VTAM administrator for more information.
To enable a specific LU or PU, Figure 11 on page 43 shows the sample VTAM
switched major node definitions.
If you already use SNA applications on the DB2 Connect workstation, then a
PU definition already exists. However, an independent LU definition might
not. The independent LU definition required for DB2 Connect must have
LOCADDR=0 specified.
----+----1----+----2----+----3----+----4----+----5----+----6----+----7--
DB2APPLS VBUILD TYPE=APPL
NYM2DB2 APPL APPC=YES, X
AUTH=(ACQ), X
AUTOSES=1, X
DLOGMOD=IBMRDB, X
DMINWNL=512, X
DMINWNR=512, X
DSESSLIM=2048, X
EAS=6000, X
MODETAB=RDBMODES, X
PARSESS=YES, X
PRTCT=SFLU, X
MODETAB=RDBMODES, X
SECACPT=ALREADYV, X
SRBEXIT=YES, X
VERIFY=NONE, X
VPACING=8
Figure 10. Sample VTAM APPL Definition for DB2 Universal Database for OS/390 or DB2 for MVS/ESA
42 Quick Beginnings