Filter
Top Products
Intel® Server Platform SR6850HW4 TPS Server System Chassis and Assemblies
Revision 1.0
Intel order number D23151-001
23
3. Server System Chassis and Assemblies
This chapter provides an overview of the chassis and assembly pieces that reside within the
platform. This chapter is divided into the following areas:
Section 3.1: Chassis, Rails and Top Cover
Section 3.2: Power and Fans
Section 3.3: Fan Subsystem
Section 3.4: Mainboard Assembly
Section 3.5: Peripherals Bay and Front Panel
Section 3.6: Front Bezel
3.1 Chassis, Rails and Top Cover
3.1.1 Chassis
The Server Platform SR6850HW4 utilizes a standard 19-inch EIA chassis that is 6U high x 28
inches deep. The chassis can be rack-mounted or used as a pedestal system. Rack mounting
the platform requires a 6U x 19 inches x 34 inches deep space, with the extra six inches
required for cable management. When used in a rack, the chassis can be mounted with an
optional rail kit and cable management arm. Pedestal operation requires a pedestal conversion
kit that consists of a different bezel, floor supports/wheels and a cosmetic cover.
The 6U height is defined by standard EIA rack units where 1U = 1.75-inches. The 28-inch depth
is measured from the front mounting flange to the back of the PCI slots. This measurement
does not include cables or the bezel.