Filter
Top Products
Reverse the Second Side in 1-2 Mode (Upside Down) (continued)
8-38
4. Touch the desired binding type key.
Touch OK to restore the Special Original Screen.
5. Touch OK on the Special Original Screen to return to the Application
Selection Screen.
6. Touch OK to return to the Basic Screen.
7. Select additional copying features, as desired.
8. Enter the desired print quantity from the control panel keypad.
HINT
See p. 3-7 for details on setting print quantity.
9. Position original(s) FACE UP in the document feeder or FACE DOWN
on the platen glass.
When selecting 2-1 Upside down mode, use RADF to scan originals.
HINTS
• See p. 3-2 to p. 3-6 for details on positioning originals.
• Use RADF store mode (p. 3-24 to p. 3-26) when the original count
exceeds 50.
10. Press [START].
CAUTION
When the finisher / paper exit / inner tray capacity is exceeded
due to the print quantity selected, remove the copied sets as
they exit; otherwise, mishandled paper will occur.