Filter
Top Products
3-38
Output Mode for Machine with Inner Tray IT-101
This section describes the following four output modes for a copier with the Inner Tray.
Non-sort mode is initially selected.
The Inner Tray IT-101 is equipped with two exit trays.
1 Non-sort mode copies the original set in amounts determined by the print quantity
setting, then outputs sorted sets normally.
2
Rotation sort mode rotates every other sorted sets by 90° upon exit, provided the same
paper size is loaded in two trays, one tray with paper loaded in portrait orientation and
the other tray with paper loaded in landscape orientation, e.g., 8.5”x11” and 8.5”x11”R.
3 Group mode copies each original page in amounts determined by the print quantity
setting, then outputs grouped sets normally.
4
Rotation group mode rotates every other grouped set by 90° upon exit, provided the
same paper size is loaded in two trays, one tray with paper loaded in portrait orientation
and the other tray with paper loaded in landscape orientation, e.g., 8.5”x11” and
8.5”x11”R.
>>>Specification for Output Modes with Inner Tray<<<
❒
Incompatible with Group mode: Proof Copy, Sheet/Cover Insertion, Booklet,
Transparency, Image Insert, Repeat, AUTO Layout, Non-Image Area Erase, Stamp
(Numbering)
❒ Incompatible with Rotation sort mode:
Sheet/Cover Insertion, Booklet,
Transparency,
Special Original (Mixed Original), Repeat, AUTO Layout, Non-Image
Area Erase
❒ Incompatible with Rotation group mode:
Using platen glass (unless Chapter with
Platen store mode, Upside down, Image Shift, or Stamp (excluding Numbering) is
used), Proof Copy, Sheet/Cover Insertion,
Booklet, Transparency, Image Insert,
Special Original (Mixed Original), Repeat, AUTO Layout, Non-Image Area Erase,
Stamp (Numbering)
3
2
1
Originals
Rotation sort Group Rotation group
Non-sort (default)
Example:
3-set copies