Filter
Top Products
Output Mode for Machine with Finisher (continued)
3-36
When selecting Staple mode, select the staple position as follows.
When selecting any other mode, proceed to step 6.
4. Touch STAPLE SET.
DETAILS
STAPLE SET
on this screen will change to
ADD STAPLE
when replacement
of the staple cartridge is required. See p. 10-5.
5. Select the desired staple position.
Touch to highlight the desired staple position key on the Staple Position Selection
popup menu.
Touch OK to restore the Output Mode popup menu.
6. Touch OK.
The Basic Screen will be restored.
DETAILS
The finisher mode icon (Non-sort: none, Sort: , Group: , Staple: )
or staple position icon appears/disappears in the message area of the
screen to indicate the selected output mode.
7. Select additional copy conditions, as desired.