Filter
Top Products
Output Mode for Machine with Finisher (continued)
3-37
8. Enter the desired print quantity from the control panel keypad.
HINT
See p. 9-3~p. 9-4 to be sure that the finisher capacity is not exceeded.
9. Position original(s).
HINT
See p. 3-2 to p. 3-6 for details on positioning originals.
10. Press [START].
Press [STOP/CLEAR] to suspend the scanning or printing job.
CAUTION
When the finisher exit tray capacity is exceeded due to the
print quantity selected, remove the copied sets as they exit;
otherwise, mishandled paper will occur.
3
Copying
Operations
Positioning
Originals
Setting Print
Quantity
Copy Size
Lens Mode
Density
1-1, 2-2
2-1
Using
Memory
Output without
Finisher
FS-107
Output Modes
IT-101
Output Modes
Check Mode
& Proof Copy
Interrupt
Mode